Academy
Generator Distance From House: The Real Minimums for Portable and Standby Units
Published · 10 min read
A neighbour of mine ran her portable generator eight feet off the back porch during last October's outage, tucked under the eave to keep the rain off it. By the second morning she had a headache that would not shift and a carbon monoxide alarm that finally caught up with reality around 4 a.m. Nobody in that house did anything reckless. They followed the instinct most people follow: keep the noisy, exhaust-spewing machine close enough to reach with an extension cord, and tucked somewhere sheltered. That instinct happens to be the exact opposite of what keeps a household safe.
"How far should a generator be from your house" sounds like it should have one tidy answer. It has at least three, and which one applies to you depends on whether you are running a portable unit for a few days a year or a permanently wired standby system, what that distance is measured to, and who is doing the enforcing. Here is each figure, where it comes from, and how to reconcile them before you park a generator anywhere.
The short answer, by generator type
Portable and standby units are not interchangeable questions. A portable generator sits on the ground wherever you put it that day; a standby unit is bolted to a pad and its distance gets checked once, at inspection, and then never moves again. The rulebooks reflect that difference:
| Generator type | Recommended / required distance | Who sets it |
|---|---|---|
| Portable (gas, propane, inverter) | At least 20 ft from the house and every opening | CPSC consumer safety guidance |
| Standby: wall (listed enclosure) | As low as 18 in, per manufacturer listing | Manufacturer + NFPA 37 reduction |
| Standby: openings (windows, doors, vents) | 5 ft minimum, no reduction | NFPA 37 §4.1.4 |
| Standby: every occupied structure | 25 ft where the lot allows it | CPSC advisory (June 2025), not yet code |
| Standby: property line | Varies, often 3–20 ft by zoning district | Local ordinance |
Notice the two standby rows are not competing figures for the same thing. One is a combustion clearance to the wall, the other is a life-safety clearance to a hole in that wall. We'll come back to why that split trips up more installations than any other single detail in our companion piece on generator clearance requirements, which walks the manufacturer-by-manufacturer figures in full.
Why portable generators need more room than standby ones, not less
It looks backwards at first. A standby unit runs unattended for days during a hurricane recovery, while a portable generator is usually run for a few hours by someone standing right next to it, so why does the portable one need four times the distance? Because a portable generator is almost always placed reactively, in whatever spot is convenient during an emergency, by someone who has not read an installation manual. It ends up on a porch, in a garage with the door cracked, or hard against a wall where wind can push exhaust straight back through a window. A standby unit, by contrast, was sited once by an installer working from a permit drawing, with its clearances already checked against the specific wall it faces.
CPSC's own numbers explain the urgency. Portable generators have been linked to an estimated 765 non-fire carbon monoxide deaths in the US since 2009, roughly 40% of every CO death the agency traces back to a consumer product, and the toll runs close to 100 deaths a year, concentrated overwhelmingly in the four coldest months when a storm knocks out power and a generator goes on within arm's reach of a door. Ahead of the 2026 hurricane season, CPSC's acting chairman put the underlying pattern plainly:
"Hurricanes and severe storms can turn deadly long after the wind and rain stop."
— Peter Feldman, Acting Chairman, U.S. Consumer Product Safety Commission
That is the case for the 20 ft figure. It replaced an older, looser "10 feet" rule of thumb that still shows up on some product boxes and owner forums. CPSC's own poisoning data showed 10 ft was not enough margin against wind carrying exhaust back toward the house, so the guidance moved up and has held at 20 ft through the 2026 season. Run the unit further than that if your yard allows it; treat 20 ft as the floor, not the target.
Standby units: why 18 inches and 5 feet are both true at once
A permanently installed unit works differently because it is fixed in place and checked once, by an inspector, against a permit drawing. NFPA 37 §4.1.4 is the baseline: five feet from an outdoor engine to a combustible wall, and five feet to any opening in that wall. Where installers go wrong is assuming that one figure moves the other. Generac's air-cooled enclosure family, for instance, was fire-tested by Southwest Research Institute, and that listing lets the wall figure drop to eighteen inches, but the listing is silent on openings. A window sitting in that same wall still needs the full five feet, measured from any part of the generator, not the nearest cabinet edge.
It is not a Generac quirk, either. Cummins states an equivalent opening figure independently in its own RS-series manual, and every jurisdiction we have checked applies the opening rule regardless of manufacturer. The practical rule of thumb: treat "clearance to the wall" and "clearance to a window in that wall" as two separate questions with two separate answers, every single time, and never let a favourable listing figure for one talk you into shrinking the other.
The layer most people miss: your own property line
None of the figures above touch the distance to your neighbour's yard, and that distance is entirely local. Scarsdale, NY is a clean illustration of how much a property-line setback can move within a single town, because it varies by zoning district rather than applying one number townwide:
| Zoning district | Rear lot line | Side lot line |
|---|---|---|
| Residence AA-1 | 15 ft | 20 ft |
| Residence A-1 | 10 ft | 10 ft |
| Residence A-2, A-2a, A-3 | 5 ft | 5–10 ft |
| Residence A-4, A-5 | 3 ft | 3 ft |
Scarsdale also caps standby noise at 70 dBA measured 23 ft from the unit, dropping to 66 dBA for side-yard placement in the two least restrictive districts, a limit that has nothing to do with combustion safety and everything to do with a neighbour's bedroom window. A township twenty minutes away can run a completely different set of numbers: Wall Township, NJ, bars front-yard placement outright and requires the unit be fully screened by an evergreen buffer visible from the street and every adjoining property, on top of its ordinary rear- and side-yard setbacks. Neither of those requirements would ever show up in a manufacturer manual or in NFPA 37, because they are not fire code. They are how a town decided to manage the sound and sight of a large mechanical box in a residential yard.
Six steps to a distance you can actually stand behind
- If it's portable: 20 ft minimum from the house, garage and any other structure, every time it runs, not just during the worst of the storm.
- Point the exhaust away from every window, door and vent, on your property and the neighbour's, regardless of the distance you've achieved.
- If it's standby: pull the manufacturer's clearance figure for every face of the enclosure, not just the one your installer quotes from memory.
- Apply NFPA 37's five-foot opening rule as its own, separate check. It never shrinks because a listed wall figure did.
- Look up your specific jurisdiction's property-line, noise and permitted-zone rules before you site the pad; assume nothing carries over from a neighbouring town.
- Where the lot allows it, aim for CPSC's 25 ft advisory distance from every occupied structure on top of the enforceable minimums. It costs nothing but yard space, and it is the margin that actually stops carbon monoxide reaching an open window.
That is precisely the check SetbackCalc automates for standby installs: enter the unit and the address, and it returns the governing figure for every face of the enclosure with the superseded ones shown alongside and the source sentence behind each number, so you're not taking a blog post's word for it. For a builder running the same check across several lots on one permit cycle, the batch mode and the JSON API do the same reconciliation without the copy-paste. See the methodology page for every figure cited above with its verbatim source quote.
Frequently asked questions
How far should a generator be from your house?
It depends which kind you're running. A portable generator should be run at least 20 ft from the house and every window, door and vent, per CPSC's current consumer guidance. A permanently installed standby unit is governed by NFPA 37 instead, which sets 5 ft to combustible walls and 5 ft to openings, though a manufacturer's fire-tested enclosure can shrink the wall figure to as little as 18 in. Neither number is optional, and they answer different questions, so check which one applies to your unit before you measure.
Is 10 feet far enough for a portable generator?
No, not under current CPSC guidance. Ten feet was common advice for years and it still circulates on the box some units ship in, but CPSC's own carbon monoxide poisoning data pushed the recommendation to at least 20 ft in 2023 and it has stayed there through 2026. Ten feet also does nothing for the wind carrying exhaust back toward an open window on a gusty day, which is the mechanism behind most portable-generator CO deaths.
Does a standby generator's 18-inch listing distance override NFPA 37's 5 feet?
Only for the wall itself, and only where the enclosure is listed for the reduction and your authority having jurisdiction accepts that listing. It never overrides the separate 5 ft figure to a window, door, vent or other opening in that same wall. That distance is measured independently, from any part of the generator, and does not shrink because the wall clearance did. Confusing the two is the single most common reason a standby placement fails inspection.
Can my local ordinance require more distance than NFPA 37 or the manufacturer?
Yes, and it frequently does. NFPA 37 and the manufacturer manual set the fire and combustion safety floor; your city, township or county then layers zoning setbacks, noise limits and permitted-placement rules on top, and those can be stricter for reasons that have nothing to do with fire code: lot-line proximity to a neighbour, a noise cap measured in decibels at a fixed distance, or a ban on front-yard placement. Always check the local layer separately; it is never derivable from the national codes alone.
What's the fastest way to check the distance for my specific address and unit?
Enter the make and model and your jurisdiction into SetbackCalc's calculator. It looks up the manufacturer's listed clearances, NFPA 37, and whatever we hold for your local ordinance, flags whichever figure is strictest for each face of the enclosure, and shows the verbatim source sentence behind every number so you can hand it to a plans examiner rather than take our word for it.
Sizing and gas-line questions are a separate calculation from placement. This article, and the calculator behind it, only answer where a unit is allowed to sit. For the manufacturer figures underneath every number above, see the full clearance breakdown by brand.
Sources: CPSC, CPSC Warns of Generator, Carbon Monoxide and Fire Hazards Ahead of Hurricane Season (May 2026); CPSC, Non-Fire Carbon Monoxide Deaths Associated with the Use of Consumer Products, 2022 Annual Estimates; CPSC, Stationary Generators: The Carbon Monoxide Poisoning Hazard and Recommendations for Mitigation (June 2025); Village of Scarsdale, NY, Generator Setbacks; and Township of Wall, NJ, Standby Generator Allowable Locations. This article is a design aid, not a substitute for the authority having jurisdiction.